Akumuliatorinis perforatorius su bešepetėliniu varikliu | 18 V | SDS PLUS | su 4 Ah

Prekių krepšelis

0 Prekė(ių) - € 0,00

Akumuliatorinis perforatorius su bešepetėliniu varikliu | 18 V | SDS PLUS | su 4 Ah (YT-827701)

Akumuliatorinis perforatorius su bešepetėliniu varikliu | 18 V | SDS PLUS | su 4 Ah (YT-827701)
Akumuliatorinis perforatorius su bešepetėliniu varikliu | 18 V | SDS PLUS | su 4 Ah (YT-827701)
10 (10/10)01
145,95 €
Prekės kodas: YT-827701

Aprašymas:

Akumuliatorinis perforatorius su bešepetėliniu varikliu | 18 V | SDS PLUS | su 4 Ah (YT-827701)

Gamintojas:
YATOYATO
Index
YT-827701
Barcode
5906083135705
Unit of measure
PCE
Volume
20.034
Weight
5.625
Attributes
Functions
shoeing, drilling, drilling with impact
Toolholder type
SDS-Plus
Toolholder size
6-12 mm
Engine (motor) type
brushless
Rotations
0-1600 min⁻¹
Hammering energy
2 J
Impact frequency
0-5400 min⁻¹
Voltage
18 V d.c.
Battery type
Li-Ion
Battery capacity
4000 mAh
Battery quantity
1
Charger included
yes
Charging time
2 h
Max. hole diameter in concrete
22 mm
Max. hole diameter in steel
13 mm
Max. hole diameter in wood
30 mm
Stroke
yes
Rotation switch
yes
Electronic rotation adjustment
yes
Work mode switch
yes
Tool positioning in chuck
yes
Work area lighting
yes
Charge level indicator
yes
Electric insulation class
III
Protection grade
IPX0
Acoustic pressure
91.3 ± 3.0 dB(A)
Acoustic power
99.3 ± 3.0 dB(A)
Vibrations
9.615 ± 1.5 / 7.497 ± 1.5 m/s²
Weight
1.83 kg
Set includes
hammer drill, battery, charger, additional handle, drilling depth limiter

Battery-powered rotary hammer with a brushless motor designed for drilling with and without impact as well as light chiseling. The brushless motor is engineered for regular use of the power tool without the need for periodic carbon brush replacement. Thanks to the SDS PLUS chuck, it allows for work with compatible drill bits and chisels. The detachable impact function enables the tool to be used for drilling in wood, metal, and plastics, while the impact drilling mode is intended for creating holes in concrete, brick, stone, and other hard mineral materials.

Three operating modes

The mode switch allows you to select the function appropriate for the task at hand:

impact drilling – for concrete, masonry, brick, stone, and other hard mineral materials
drilling without impact – for wood, metal, plastics, and materials where impact should not be used
chiseling – for light chiseling and breaking; in this mode, the impact mechanism operates without the chuck rotating
An additional switch position allows you to set the angle of the chisel before starting chiseling. The mode switch should only be adjusted when the tool is turned off.

Performance parameters

The motor achieves 0-1050 RPM, and the impact frequency is up to 5400 impacts/min. The energy of a single impact is 2 J. The rotary hammer allows for drilling holes with a maximum diameter of 22 mm in concrete, 30 mm in wood, and 13 mm in metal. The diameter range for drill bits used is 6-12 mm for serial drilling.

The rotational speed can be adjusted by the pressure applied to the switch. In impact drilling mode, increasing the rotational speed also increases the impact frequency. The direction of rotation can be switched between clockwise and counterclockwise.

Depth control and tool guidance

Drilling depth limiter allows for creating holes of a repeatable, pre-set depth. It facilitates maintaining consistent dimensions when making multiple holes. An additional handle increases control over the rotary hammer during operation.

18 V battery power supply

The rotary hammer operates with Li-Ion YATO 18 V batteries. Two equipment variants allow you to select a set compatible with your existing system:

YT-827701 set with a Li-Ion 18 V 4 Ah battery and charger
YT-827702 tool without a battery and charger, with the option to power it with a selected battery from the YATO 18 V system: YT-828461 (2 Ah), YT-828462 (3 Ah), YT-828463 (4 Ah), YT-828464 (6 Ah), and YT-828465 (9 Ah)
Key features:

battery power supply 18 V
tool holder SDS PLUS
3 operating modes: impact drilling, drilling without impact, chiseling
impact energy 2 J
impact frequency 0-5400 impacts/min
rotational speed 0-1050 RPM
max. drilling diameter:
in concrete: 22 mm
in wood: 30 mm
in metal: 13 mm
drill bit diameter: 6-12 mm (optimal range)
speed adjustment by pressure on the switch
direction of rotation switch
drilling depth limiter
additional handle
battery charge indicator
YATO 18 V Li-Ion batteries
two equipment variants: with battery and charger or without them
weight: 1.83 kg
Included:

YT-827701:

rotary hammer
Li-Ion 18 V 4 Ah battery
charger
additional handle
drilling depth limiter
YT-827702:

rotary hammer
additional handle
drilling depth limiter
Charger parameters (YT-827701):

input voltage: 200–240 V AC, 50/60 Hz
output voltage: 21.5 V DC
output current: 2.2 A
rated current: 2 A
charger insulation class: II

Papildoma dokumentacija:

Panašios prekės

Kontaktai

UAB "VIGORUS"

Tel. nr.: +370 657 48355
El. paštas: info@vigorus24.lt

Darbo laikas:
I-V: 9.00-17.00
© 2015. UAB "Vigorus". Visos teisės saugomos.
Prisijungti|Registruotis